Automatic Lightning Protection

Order Toll Free 800-532-0990

HOME
RODS AND BASES
CONDUCTOR CABLE
CRIMP CONNECTORS
BOLT TENSION CONNECTORS
TREE EQUIPMENT
SURGE ARRESTERS
ORNAMENTS
CHOOSING METALS
DAMAGE PHOTOS
UNDERSTANDING IT ALL
PARTS TO SELECT
DIAGRAMS & INSTRUCTIONS PAGE 1
DIAGRAMS & INSTRUCTIONS PAGE 2
POLICY/CONTACT
FAQ'S

 

# RSP1 Copper Roof Rod with Mount and Clamp $38.65
Roof Rod and Mounting Saddle with 3/8" dia. x 12" Rod, 
Easy Fit Saddle base will form to fit any pitch roof.
Cable connection is bolt tension for a secure connection to your conductor cable, not a crimp style.

# ARSP1 Aluminum Roof Rod with Mount and Clamp $18.10
Roof Rod and Mounting Saddle with 1/2" dia. x 12" Rod, 
Easy Fit Saddle base will form to fit any pitch roof.
Cable connection is bolt tension for a secure connection to your conductor cable, not a crimp style.

# RSP26 Copper Flat Mount Base with cable clamp and rod.  $37.30
12” long x 3/8” dia. rod
Used on flat surfaces either horizontally or vertically. If using vertically, order compatible swivel SWB1.

# ARSP26 Aluminum Flat Mount Base with cable clamp and rod. $17.70
12” long x 1/2” dia. rod. 
Used on flat surfaces either horizontally or vertically. If using vertically, order compatible swivel SWB1.

# RSP18 Flat Copper Swivel Base w/ Rod  $58.00
Rod measures 3/8”  Dia. x 12” Rod and swivel adjustable base for any angle. Ideal for side mounting on flat surfaces or pitched.  Convenient way to partially conceal an external system. Rods also available in other sizes.

# ARSP18 Flat Aluminum Swivel Base w/ Rod  $27.95 
1/2”  Dia. x 12”  Rod and swivel adjustable base for any angle. Ideal for side mounting on flat or pitched surfaces.  Convenient way to partially conceal an external system. Rods also available in other sizes.

# RSP16 Copper Adhesive Base and Rod.  $37.13
Rod is 12” x 3/8” dia. This can be used where ever you cannot penetrate the roof membrane or other places such as chimneys or other vertical or flat places.

# ARSP16 Aluminum Adhesive Base and Rod.  $19.70
Rod is 12” x 1/2” dia. This can be used where ever you cannot penetrate the roof membrane or other places such as chimneys or other vertical or flat places.

# RSP13 Copper Adhesive Base with Rod and Swivel  $58.00
Rod is 12”  x 3/8” dia. This can be used on any flat surface with any degree pitch and the lightning rod can be adjusted with the swivel. Especially useful on rubber roofs, metal roofs or any roof you do not want to penetrate the surface with screws or nails.

# ARSP13 Aluminum Adhesive Base with Rod and Swivel  $27.25
Rod is 12”  x 1/2” dia. This can be used on any flat surface with any degree pitch and the lightning rod can be adjusted with the swivel. Especially useful on rubber roofs, metal roofs or any roof you do not want to penetrate the surface with screws or nails.

CHIMNEY LIGHTNING ROD PARTS

# LF12-F Copper Flat Mount Chimney Rod and Base $31.70
For mounting flat on top of metal cap or mortar cap next to flue. Rod is 3/8 Inch Dia. x 12 Inch. Lead Coated Copper. Cable connection is bolt tension for a secure connection, not a crimp style.  This can also be used in applications other than chimneys.

# ALF12-F Aluminum Flat Mount Chimney Rod and Base $16.60
For mounting flat on top of metal cap or mortar cap next to flue. Rod is 1/2 Inch Dia. x 12 Inch.  Cable connection is bolt tension for a secure connection, not a crimp style.  This can also be used in applications other than chimneys.

# LF12-T Copper Chimney Flue Tile $36.90
Leaded cast bronze base for mounting air terminals to flue liner. Has 2  Stainless steel bolts to anchor to the flue. Approx. 2-1/2" x 2-3/4"   Includes 3/8" by 12" lead coated copper lightning rod.

# ALF12-T Aluminum Chimney Flue Tile $18.70
Cast aluminum base for mounting air terminals to flue liner. Has 2 stainless steel bolts to anchor to the flue. Approx. 2-1/2” x 2-3/4”. Includes 1/2” dia. by 12” aluminum lightning rod.

# LF18 Copper Chimney Rod with Side Mount and Coupler Adaptor.  $26.30
3/8" x 18" Lead coated copper rod, supplied with 2 clips to secure in place. Threaded top end for rod and open female end for conductor cable using 2 stainless steel bolts supplied.

# ALF18 Aluminum Chimney Rod with Side Mount and Ccoupler Adaptor.  $15.10
1/2" x 18" Aluminum rod, supplied with 2 clips to secure in place.  Top end is threaded for the lightning rod and bottom end is open female end to connect cable using 2 stainless steel bolts supplied.

Concealed Rods for Concealed Systems

Concealed System Lightning rods.   All parts used in a concealed system are the same except for the lightning rods and the through wall or roof cable connectors.

Concealed Systems are just like a regular external system except they can be installed within the wall cavities and attic area under new construction.  The design is done in the same manner.  You just need to picture everything internally with connections for the lightning rods in their location.  The 250B concealed rods are two basic parts.  The internal threaded part which remains inside the ceiling attic area with the knuckle exposed above the shingles or other roofing.  Then the lightning rod/air terminal will be screwed into the swivel knuckle on the outside.  Run all cable laterally and or in a downward fashion to the ground.  Lightning cannot travel uphill just as a river will not flow upstream.

# 250-B Copper Thru Ridge Concealed Assembly $37.25
Consists of a 3/8” dia. x 12” rod and 1/2” dia. x 12” length of stainless steel threaded rod with cable conductor bolt tension clamp, washers, nuts.  Available in longer lengths if needed.

# A250-B Aluminum Thru Ridge Concealed Assembly $23.50
Consists of a 1/2” dia. x 12” rod and 1/2” dia. x 12” length of stainless steel threaded rod with cable conductor bolt tension clamp, washers, nuts.  Available in longer lengths if needed.

Picture available only in copper.

# TSC-5 5" Copper Thru Roof or Wall Connector $22.50
Used in concealed systems (new construction) to take conductor cable from the inside of the building thru the wall to the outside so you can pick it up again to go to your ground rod or ground plate. Bolt tension connections. Threaded rod is 5 inches long.  Longer versions are available by special order.

# ATSC-5  5" Aluminum Thru Roof or Wall Connector $17.50
Used in concealed systems (new construction) to take conductor cable from the inside of the building thru the wall to the outside so you can pick it up again to go to your ground rod or ground plate. Bolt tension connections. Threaded rod is 5 inches long.  Longer versions are available by special order.

# SWB1 Bronze Swivel $20.70
For any of our lightning rod bases where you need to mount somewhere pitched or vertical and have to adjust the angle of the lightning rod.

# SWA1 Aluminum Swivel $11.25
For any of our lightning rod bases where you need to mount somewhere pitched or vertical and have to adjust the angle of the lightning rod.

# GP1 Ground Plate  $69.95.
 2 square feet. 1’ x 2’x 0.032 thickness.  Used in soil shallow areas where ground rods cannot be driven.  Ground plates must be buried at least 2 feet below grade and 2 feet away from structure.

#98 Ground Rod Clamp $17.85.
Heavy duty cast bronze/copper clamp with 2 stainless steel bolts for proper connection. Made for cable and rods from 1/2” diameter up to 5/8” diameter.

NEVER use aluminum for grounding.  Transition from aluminum cable to copper cable by using the bimetallic connector #M3
   

LIGHTNING RODS
and
SURGE ARRESTERS

WHOLESALE DISTRIBUTOR for
HOME
FARM
INDUSTRY

 

HOME
RODS AND BASES
CONDUCTOR CABLE
CRIMP CONNECTORS
BOLT TENSION CONNECTORS
TREE EQUIPMENT
SURGE ARRESTERS
ORNAMENTS
CHOOSING METALS
DAMAGE PHOTOS
UNDERSTANDING IT ALL
PARTS TO SELECT
DIAGRAMS & INSTRUCTIONS PAGE 1
DIAGRAMS & INSTRUCTIONS PAGE 2
POLICY/CONTACT
FAQ'S

Privacy Policy